Product main product description:

Product model: STD-TG-100W-C-05

Rated power (W): 100W

Input voltage: AC85-265V

Service life (H): 50000H

Luminous flux (LM): 8500-10500LM

Color temperature (K): 2700-6500K

Color rendering index (RA): >75

Light source particle 2*50W, anti-lumen package

Protection level: IP65

Housing material: die-cast aluminum + tempered glass

Lamp size: 360*285*100mm

Packing quantity: 2PCS

Outer box size: 400*400*500mm

Gross weight: 21.6KG

 

product description:

1. The main structural components of the lamp body adopt a new type of aluminum lamp body, and the surface is electrostatically sprayed, which has the advantages of impact resistance and corrosion resistance.

2, the lighting profile: the main body is made of high-strength tempered glass material, processed by special process, not easy to be deformed, processed by special process, with

Better light output and UV resistance.

3, flood light effect: the light source uses high-grade high-power LED light source, LED combination optical arrangement, better light mixing effect

4. Safety: The design is strictly in accordance with the SAA UL standard.

5. Environmentally friendly, safe, non-polluting and RoHS compliant.






Scope of application:

Outdoor lighting, architectural decorative lighting, billboards, sports centers, factory buildings, fill light, ports, docks, squares, public

Parks, shops, subway stations, gas stations, green lighting and other places.

installation steps:

1. There are mounting holes on the base of the lamp.

2, 2, lift the base to the installation position.

Use 3, pen or other tool to make the position of the screw on the wall.

4, 4, drilling.

5, 5, install the base, stabilize the screws and so on.

6, 6, adjust the screws on the fixed clip, adjust the lamp to the appropriate angle of illumination.

7, 7, there are three power lines at the bottom of the lamp, AC POWER INPUT is the AC mains input, connected to the AC grid. This line is 3 cores

Line; blue line is zero line N, brown red line is fire line L, yellow/yellow green line is ground line PE.


Precautions:

1. The lamp is designed to be waterproof and moisture-proof, and its protection level can reach IP65. It can withstand the test of rain from top to bottom but can not be submerged under water, and its protection level does not meet the requirements of underwater work.

2, 2, the position of the lamp installation must have sufficient capacity, the ability to withstand more than 10 times the weight of the drive.

3, 3, the working power of the lamp is high-voltage AC, should be away from the easy access of the people, and the grounding of the lamp, must be grounded.

4, 4, the lamp is a power type device, and is very sensitive to the ambient temperature. When the working environment temperature is higher than 45 °C, its life will be significantly reduced, accompanied by surface signs of severe light decay. Therefore, the luminaire should be placed in a ventilated and ventilated place to keep the lamp in a relatively good thermal environment.

5, 5, the working environment temperature of the lamp should be between -25 °C ~ +45 °C. The temperature in the workplace must not exceed 45 ° C to ensure the life of the lamp.

6, 6, because the power of the lamp is relatively large, the appropriate power line should be selected according to the actual power when laying the power line. And phased power supply.